Dosilet Oven Resistance 1100W 230V
1100W 230V DOSILET Largo total 340mm,largo sin conexiones 310mm, distancia entre conexiones 150mm
List of products by brand DOSILET
There are 4 products.
Dosilet Oven Resistance 1500W 220V
1500W 220V DOSILET
Oven Resistance Dosilet 60X355Mm 1000W 220V
✅ Electric heating element for Dosilet ovens rated at 1000 W and 220 V, approximate dimensions 60 x 355 mm, designed for professional and countertop ovens.
✅ Compatible with Dosilet ovens using a straight 1000 W heating element with a length of approximately 355 mm.
✅ Technical function: provides uniform heat inside the oven cavity to ensure stable cooking performance.
✅ Replacement recommended when the oven does not heat properly, shows reduced thermal output or the element has no continuity or visible damage.
✅ Compatible with Dosilet ovens using a straight 1000 W heating element with a length of approximately 355 mm.
✅ Technical function: provides uniform heat inside the oven cavity to ensure stable cooking performance.
✅ Replacement recommended when the oven does not heat properly, shows reduced thermal output or the element has no continuity or visible damage.
Toaster Resistance Dosilet 1400W 230V
✅ Electric heating element for Dosilet toaster rated at 1400 W and 230 V, designed for rapid heat generation in professional kitchen equipment.
✅ Compatible with Dosilet toasters using a 1400 W tubular or radiant wire heating element in single-phase 230 V systems.
✅ Technical function: provides uniform heating inside the toaster chamber for fast and consistent toasting cycles.
✅ Replacement recommended when the toaster fails to reach temperature, shows cold spots or the element has broken filament or no electrical continuity.
✅ Compatible with Dosilet toasters using a 1400 W tubular or radiant wire heating element in single-phase 230 V systems.
✅ Technical function: provides uniform heating inside the toaster chamber for fast and consistent toasting cycles.
✅ Replacement recommended when the toaster fails to reach temperature, shows cold spots or the element has broken filament or no electrical continuity.