Vaillant 0020093717 Vcm180 Boiler Water Filter

Uncover And Clean The Coil Of The Gas Heaterhello Plumber Today I Am Going To ±Teach You How To Uncover And Clean The Coil Of The Gas Heater A Simple Repair Of A Gas Heater, Which Over Time Becomes Clogged By The Effect Of Limescale. Tools : 1. Wrench 2. Star Tip Screwdriver 3. Salfumant Or Vinegar (To Choose) 4. Hands Of Course (And With Rubber Gloves Better)1St - First Step: Disassemble Heaterthe Coil Is A Circuit Of Pipes Through Which Cold Water Passes And When Subjecting The Coil To Heat (Gas In This Case We Remove The Cranks To Plug In The Heater And The One To Regulate The Temperature Of The Water. Then We Will Remove The White Steel Lid To Expose The Inside±S Of The Heater, The First Thing We Will See Will Be The Coil. On The Back To The Right And Left You Will See Some Copper Tubes With A Thread, Unscrew Them, You Can Remove The Coil. 2Nd - Second Step: Clean Coil When We Have It We Put It Upside Down And With The Salfumant Or Vinegar We Put It Through One Of The Tubes, And We Move Away We Leave It On For About 20 Minutes With The Salfumant And If It Is With Vinegar 3 Hours It Leaves It Perfect. Then We Put It Upside Down, Put Water Through One Of The Tubes With A Hose And Rinse It. 3Rd - Third Step: Assembly And Commissioning We Reassemble The Coil, Put The Heater Cover, Screw It And Put The Cranks Of The Water Regulator And The Ignition Control. We Turn On The Water And Plug In The Heater. We Remove The Filter From The Tap Where We Go To Open The Hot Water So That The Heater Turns On, We Do It So That No Residue Remains And The Water Runs More Freely And That It Finishes Cleaning Well And That'S It.