Low temperature pressure gauge R410A 63mm without bridge
zoom_out_map
chevron_left chevron_right

ad.jpg

Advertising [Product3rdColumn]

Low temperature pressure gauge R410A 63mm without bridge

Low temperature manometer

Gases: R410A.

Diameter: 63 mm.

Pressure scale: -0.1~ 1.5 Mpa.

IMPORTANTE: No se aceptan devoluciones de compresores ni unidades condensadoras. Asegúrese que producto necesita antes de realizar su compra.

Car air conditioning charge analyzer

How and when you should charge your car's air conditioning

The air conditioning charge is performed using a charging station that is programmed according to the car model.
The charging station recovers the refrigerant fluid from the vehicle, cleans it, and dehydrates it so there is no moisture in the circuit.

With summer just around the corner, more than one driver has started to tune up their vehicle to ensure trouble-free driving on their vacation.
Air conditioning charging is one of the most important tasks to check if we don't want our car to turn into a four-wheeled oven.
First, you need to know that the pollen filter is what affects the air conditioning, since it gets dirty with use and filters worse. Furthermore, if it's very clogged, it doesn't allow enough air flow, which impairs the air conditioning capacity. Now then, how is the air conditioning charged? "The charge is performed using an air conditioning charging station," León points out, "this station is programmed according to the car model, since the charge varies depending on the amount of refrigerant and oil in each vehicle, among other things". This device is responsible for recovering the refrigerant fluid from the vehicle (fluorinated gas), cleaning it, and dehydrating it, since moisture is the first enemy of air conditioning. "In vehicles of certain age, the gases they come with as standard (R12) do not comply with current regulations, so it is necessary to dispose of them according to the European protocol and charge a gas compatible with legislation," León adds. Although the charging procedure has not changed over the years, technology has evolved to adapt to the charging needs of the new gases currently used. "We work with gases at higher pressure.
In summary, these would be the steps to charge the air conditioning with the charging station: First, the high and low pressure hoses are connected to the vehicle circuit. The machine begins operating with cleaning and recovery of the old gas and oil. When finished, the circuit is checked for leaks using a vacuum. Finally, if there are no leaks, the gas and oil charge is performed. Once the process is complete, a check is made to ensure the air conditioning is working correctly. Below we offer a video explaining how one of these charging stations works.

When is it recommended to charge the air conditioning? Just as important as knowing how is knowing when.
"In principle, the refrigerant fluid does not wear out, unless there is a leak or micro-leak, which tends to
FREEZE
AGG0072
chat Comments (0)