Advertising [Product3rdColumn]
Eccentric flare tool ratchet 45 degree cone 1/4 3/8 1/2 5/8 3/4
✅ Functionality: Tool for flaring tubes in installations that require tubing, such as an air conditioning or heating installation, in flaring sizes from 1/4", 5/16", 3/8", 1/2", 5/8", 3/4".
✅ Features: The tool consists of 3 parts; the ratchet handle clutch releases automatically when the flare is complete. A screw with a handle, at the end of which is the expander, a bar with different flaring sizes for tubes and a bar that is used on the screw in order to make it turn and penetrate, shaping the tube.
✅ Material: High-quality, strong chrome-plated steel. With materials tested to last over time and make installing refrigeration equipment easier.
✅ Directions: hand tool used to widen the ends of a tube or pipe in order to make it easier to join with another tube or pipe; thanks to its quality, design and materials, our flaring tool ensures that this joint is leak-tight to avoid losses.
✅ Use: for making single or double flares in thin-walled copper, brass and aluminium tubes, and recommended for installers, plumbers, mechanic workshops and metalworking industries.
IMPORTANTE: No se aceptan devoluciones de compresores ni unidades condensadoras. Asegúrese que producto necesita antes de realizar su compra.
What do we do when we flare?
When we flare, we simply widen the end of a tube in a conical shape. It is a tool that does not require excessive skill, as it is easy to use. Generally, the flaring tool is made up of three main components: a metal bar with notched holes where pipes of different sizes fit, a screw with a handle that enters the mouth of the tube, and a metal arc where the handle fits and allows rotation. The metal parts of the flaring tool are made of chrome-plated stainless steel, which makes them resistant to rust and corrosion, and guarantees a good-looking finish.
How to use a flaring tool?
First, you must clean the end of the tube and remove any impurities it may have. Next, we must know the measurement of the tube to know which hole in the metal bar we should use. You must place said bar in the hole found below the screw, tighten the arc so that the bar is held firmly and we can turn the wrench without any problem. Finally, we must insert the end of the tube into the hole to, ultimately, turn the screw and press the cone into the tube.
Hole sizes:
1/4 inch
5/16 inch
3/8 inch
1/2 inch
5/8 inch
3/4 inch
feedback Report comment